What separates us from the competition is that we have the only patented tool that works in the "Flash Zone". The Freedom Tool is able to take pressure measurements in the flash zone as well as remove the emissions as soon as they occur in the "Flash Zone" in the tank. This enables us total carbon capture, even the heavy gasses that a roof pull or a vapor tower misses. This increases the total volume of gas removed and increases your gas BTu richness.
This same patented technology, because of where it sits in the "Flash Zone"of the tank, can extinguish tank fires in a matter of seconds. This can be done automatically and unmanned. We install an infrared camera to look at tanks for fire. If lightning, static, mechanical or terrorist act, starts a fire the camera will detect this, and we have self-stored fire foam on site. The fire foam is released in the tank covering the surface area rapidly. The foam enters the tank internally and is placed in the exact correct spot a few inches above the oil, extinguishing the fire.
The Patented Xtreme Tank Technologies Tool solves RVP (Reid Vapor Pressure) issues. The XTT captures the full spectrum of gasses from the heaviest to the lightest that traditional roof/vapor tower collection do not collect. By capturing all the gasses a few inches above the oil level, and taking them out of the tank, we are lowering the RVP.
By handling your carbon capture in the "Flash Zone", you are able to accomplish complete carbon capture.
The XTT tool also carries a liquid line on it that can be used for selling "bad oil". The sales lines on tanks are 10'' from tank bottoms. When producers have an emulsion and the oil is below 99% pure oil they cannot sale the oil. The emulsion will be 2' to 5' in depth on a tank bottom. If the tank is 16' tall and full, the producer must shut in wells.
With our XTT tool installed inside tanks the producer can take liquid draw from the 16' level and pump the good oil out of the tank, leaving production space to not shut in wells. The producer can now run chemical into XTT and let it release on the top level of the "bad oil". The chemical will now fall through the oil knocking out the BS&W from the oil. This saves the producer from shutting in production and helps move good oil out of the way to treat only "bad oil".
The Patented XTT Tank Tool collects vapor in the flash zone where the natural distillation process occurs. The XTT tool is able to capture the complete spectrum of gasses, from the heaviest to lightest gas. Our pressure transmitter is reading in the "flash zone", the most volatile area in the tank.
Compared to those that pull from the roof of a tank, or the top of a vapor tower where heavy gasses never reach, we are different! We have TOTAL carbon capture.
The XTT Tool has had gains of 18% volume of gas pumped off the tank and increase in BTu richness of gas.
The Xtreme Tank Technology tool is also capable of changing the tanks total atmosphere from flammable to inert. We can release nitrogen from the tool in the flash zone a few inches above the oil and purge the tank changing the atmosphere of the tank. This can be used for maintenance on tanks or for approaching storms.
At Xtreme Tank Technology we have developed a patented tool that is removing the gases that are released from the oil right at the oil level. As soon as the gases "flash" out of the oil, our tool captures the gas and removes it from the tank and with a compressor puts it into a sales line.
The Xtreme Tank Technology Tool can also extinguish tank fires by applying foam internally in the tank directly above the oil level. The patented Xtreme Tank Technology Tool can also purge a tank from the oil level out the vent stack with inert gas to lower your chances of a fire. Some fires, as the ones that happen in the oil and gas industry, can be deadly, and need to be extinguished as soon as possible. Rely on Xtreme Tank Technology to help you put out the fire.